Ives Wall Stops & Holders Automatic Wall Holder Base Height 2" - WS40

Designs

• Floor Stops – Floor stops are mounted to the floor and stop the door from opening too far and hitting the wall or another door
• Floor Stops and Holders - Floor stops and holders are mounted to the floor and stop the door from opening too far and hitting the wall or another door but also can hold the door open with a hook that manually is connected to the door
• Wall Bumpers / Stops – Wall Bumpers and stops are mounted to the wall and stop the door from opening too far and hitting the wall or another door
• Wall Holders – Wall holders are mounted to the wall and stop the door from opening too far and hitting the wall but also can hold the door open with a hook that manually is connected from the door to the wall holder
• Kick Down Holder – Kick down holders are mounted to the face of the door and can either be in the up position to let the door swing freely or the down position to hold the door open at different angles
• Roller Bumpers – Roller Bumpers are typically mounted on a door to prevent two door from slamming into each other. The roller bumper stops the second door from opening and rolls the second door to a completely open or closed position
• Residential Door Stops – Residential door stops are mounted at the base of the door or wall to stop from opening too far and hitting the wall or another door
• Hinge Pin Stops – Hinge pin stops are mounted on the pin of the hinge to stop the door from opening too far and hitting the wall or another door
• Silencers – Installed on metal frames featuring pneumatic design that, once installed, forms an air pocket to absorb shock and reduce noise of door closing

Finishes:

• 605, US3 – Bright Brass, Brass
• 606, US4 – Satin Brass, Brass
• 609, US5 – Satin Brass, Blackened, Satin Relieved, Clear Coat, Brass 
• 612, US10 – Satin Bronze, Bronze
• 613, US10B – Oil Rubbed Dark Bronze, Bronze
• 619, US15 – Satin Nickel Plated, Brass, Bronze
• 625, US26 – Bright Chrome, Brass
• 626, US26D – Satin Chrome, Brass

WS20 and WS20X Manual Wall Holders

• Constructed in cast brass or aluminum
• Replaceable rubber bumpers feature off-set shoulder and threaded shank that screws into body of holder
• Hinged strike furnished matches body material and finish
• WS20 is furnished wood screws for drywall mounting
• WS20X is furnished with threaded stud and exspansion shield for masonry type mounting

WS33 and WS33X Wall Stops

• Constructed in a durable cast brass
• Replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft
• Sloping design discourages vandalism
• WS33 is furnished with wood screws for drywall mounting
• WS33X is furnished with a threaded stud and expansion shield for masonry type mounting

WS65 Wall Stop

• Burnished cast aluminum
• Replaceable non-marring white rubber bumper
• Packed with sheet metal screws

Wall Bumpers
WS401CVX, WS401CCV, WS402CVX, and WS402CCV Wall Bumpers

• Constructed in heavy-duty cast brass
• Special retainer cup makes rubber tamper resistant
• WS401CVX (401) – convex rubber bumper, packed with wood screw and plastic anchor
• WS401CCV (401-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor
• WS402CVX (402) – convex rubber bumper packed with screw and drywall anchor
• WS402CCV (402-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor

WS404CVX Wall Bumpers

• Compact size
• Constructed in cast brass
• Totally concealed mounting discourages vandalism or tampering
• Unit furnished with grey convex rubber bumper
• Packed with sheet metal screw, rawl plug and brad

WS406CVX, WS406CCV, WS407CVX, and WS407CCV Wall Bumpers

• Constructed in sturdy yet economical wrought base of brass or stainless steel construction
• Feature concealed tamper-proof mounting
• Shipped factory preassembled backplate to reduce installation cost
• Easy installation by inserting screwdriver through small hole in rubber
• WS406CVX (406) – convex rubber bumper, packed with wood screw and plastic anchor
• WS406CCV (406-1/2) – concave rubber bumper, which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor
• WS407CVX (407) – convex rubber bumper packed with screw and drywall anchor
• WS407CCV (407-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor

411R-W Wall Bumper

• Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only
• Non-marring white rubber
• Concave design permits knob to strike stop without damaging or engaging lock mechanism

Wall Stops & Holders
WS443 and WS447 Wall Stop

• Constructed in brass
• Ideal for interior or exterior use
• Replaceable non-marring rubber tip
• WS443 is packed with expansion shield and lead shield for masonry type mounting
• WS447 is packed with wood screws for drywall mounting

WS445 and WS449 Manual Wall Holder

• Constructed in cast of brass or aluminum
• Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike
• Unit requires manual disengagement to release Hold-Open
• Replaceable resilient, non-marring rubber tip
• WS445 is packed with expansion shield and lead shield for masonry type mounting
• WS449 is packed with wood screws for drywall mounting

Automatic Wall Holders
WS40 Automatic Wall Holder

• Constructed of sturdy cast brass, or aluminum
• Holder is mounted on wall and strike is mounted on door
• Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock
• Universal screw pack accommodates all types wall construction

WS45 and WS45X Automatic Wall Holder

• Constructed of cast brass, bronze or aluminum
• Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position
• A heavy rubber pad cushions the shock and absorbs the sound
• With unit mounted on door and the strike on wall, vertical adjustment is available on body
• The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date
• WS45 strike is furnished with wood screws for drywall mounting
• WS45X strike is furnished with a threaded stud and expansion shield for masonry type mounting